Customization And Memory - B-52 Instruction And User's Manual

CUSTOMIzATION and MEMORY

Your Prodigy can be customized to produce virtually
any sound you desire. Please follow these instructions
below to help reach your goal.
DISPLAY SETTINGS: You can access SLEEP TIME, RUN
TIME and STOP TIME settings by pressing TRACK knob
while holding down the TIME button. You will see SLEEP
on display. You can switch to RUN TIME and STOP
TIME by turning TRACK knob by a click. To change
either of them, press TRACK knob one more time once
you see SLEEP, RUN TIME or STOP TIME on display.
You will see current value on display; you can adjust it
now by rotating TRACK knob. You can return to previ-
ous menu by pressing TRACK again or you can exit by
pressing TIME knob. (graphic #7)
---- SLEEP TIME is the time after which the CD player
will go to SLEEP mode if no controls are operated. The
default setting is 45 min. It can be adjusted from 0 min
(graphic #7)
PreCision for your PAssion
to 120 minutes in 5-minute increments. "Zero" minutes
equals "no sleep" but this decreases the life span of
the CD lasers. Set a SLEEP TIME, such as 15 minutes,
to maximize the lifespan of the unit's lasers and CD
mechanisms.
• TIP: If the CD player goes into SLEEP mode, you
can return it to normal operation by pressing the
CUE or PLAY buttons.
---- STOP TIME indicates how long the running line on
the LCD display stays still before it starts moving when
new track is selected. Default is set to 1 second and
can be adjusted from 0.5 seconds to 20 seconds in 0.5
second increments.
---- RUN TIME is used to set the speed of running line,
when a track's info is displayed. Default is set to 400
msec (0.4 seconds), and can be adjusted from 20 msec
to 1 sec in 20 msec increments.
continued Next Page
B-52 Professional Prodig y - Instruction Manual
11