Transferring Via The Usb Interface; Transferring Maps; Transferring Music And Images - Becker TRAFFIC ASSIST PRO 7929 Operating Instructions Manual

General operations
Transferring via the USB
interface
The Traffic Assist Pro can be connected
directly to a personal computer via the
USB interface.
5006
The link then involves several steps:
Switch off the Traffic Assist Pro.
!
Remove the protective cap on the
!
USB socket on the underside of the
unit.
! Connect the Traffic Assist Pro to the
computer using the USB cable.
! Switch the Traffic Assist Pro back on:
The Traffic Assist Pro establishes a
connection to the
automatically.
30

Transferring maps

The installation software from the DVD
should be used for the transfer. This in-
volves the following stages:
! Switch off the Traffic Assist Pro.
Remove the SD memory card and
!
insert in an SD card reader or connect
the Traffic Assist Pro to the computer
using the USB cable.
Start the computer and insert the
!
DVD.
Transfer the contents of the card using
!
the installation program.
de the SD memory card back into the
!
Traffic Assist Pro or remove the USB
cable correctly.
! Switch the Traffic Assist Pro back on.
computer

Transferring music and images

Files can be transferred via a card reader
or the USB connection to a PC.
Note:
Using USB memory sticks to play MP3
files or display images
significantly decrease the capacity of
the battery.
Note:
Using USB memory sticks (for MP3s)
may interfere with the GPS signal.
Note:
Assign a self-explanatory directory
name. This will help you to locate the
desired file in the Traffic Assist Pro.
may