Unit bracket
The unit holder on the Traffic Assist Pro
can
be
attached
directly
windshield or the instrument panel of
your vehicle (see also page 23).
Note:
The Traffic Assist Pro and unit bracket
must not be exposed to long periods of
direct sunlight. Temperatures inside the
vehicle of +70 C and higher may damage
parts of the bracket.
The TMC receiver is integrated in the
unit holder and has connections for an
external power supply, a TMC antenna,
stereo earphones and a radio mute
function for navigation announcements.
1
to
the
2
3
4
1 "Rotate" fastening screw
2 Bracket/TMC receiver
3 Suction cup lever
4 Suction cup
5 "Horizontal" fastening screw
6 "Vertical" fastening screw
General operations
Fitting the unit bracket
5
The unit bracket can be secured directly
to the inside of the windscreen or to the
dashboard.
Note:
Fasten the unit holder such that your
6
field of vision is not impaired when the
Traffic Assist Pro is installed and ensu-
re that the unit is outside the deploy-
ment area of the airbag.
Ensure that the electrical connection
cable does not hamper you from acces-
sing the vehicle's controls.
Also ensure that there is enough space
to easily slide the Traffic Assist Pro
back out of the bracket.
Clean the mounting area on the wind-
screen or dashboard so that it is clean
and free of grease. Do not use smearing,
soapy cleaning agents, otherwise this
may affect how it sticks to the dash-
board.
23