Voice Selection - Becker TRAFFIC ASSIST PRO 7929 Operating Instructions Manual

Short route With this option, the
shortest route is calcula-
ted in terms of kilomet-
res travelled.
Press the following boxes one after ano-
ther:
• Motorways
• Ferries
• Toll roads
Select one of the following options:
!
Setting Meaning
Allowed With this option, the
corresponding road type
6059
is included in the route
calculation.
Avoid With this option, where-
ver possible, the corres-
6061
ponding road type is
avoided.
Not permitted With this option, the
corresponding road type
6060
is not included in the
route calculation.
Saving a destination
The Save button opens a window that
allows you to spell the destination using
the letter menu (the entry menu allows
you to change between upper and lower
case). Once you have made your entry
via the letter menu, you have the option
of recording a voice command to select
the destination at a later time.
6053
Press the Voice recording button and
!
follow the instructions on the display.
6053
If you have entered a name and pressed
OK to accept it, the destination is
transferred to the fast access menu,
saved and marked with an asterisk.
Navigational mode
If you do not wish to make a voice re-
!
cording, press the button 602

Voice selection

The "voice selection" fast access button
(see also page 13) gives you the option
of accessing stored destinations directly
using the voice recording function.
! Press the "voice selection" button on
your Traffic Assist Pro and repeat a
previously stored voice command
after the signal.
The unit starts to calculate the route and
initiates navigation.
.
41