The List Of Destinations; Icons Used; Operating Rapid Access; Starting Using An Existing Destination - Becker TRAFFIC ASSIST PRO 7929 Operating Instructions Manual

Navigational mode

The list of destinations

The list of destinations displays all the
destinations available for quick selection
line-by-line. Each line is split into two
boxes. Each list box is depicted as a key.
The destination is named on the right-
hand key and its characteristics shown in
the left-hand icon.
Note:
The last 50 destinations are saved in the
destinations memory. Once the memory's
capacity has been fully used up, the ol-
dest destination is automatically deleted
whenever a new one is entered. Impor-
tant destinations can however be pro-
tected.
34

Icons used

The following icons are used in the list
of destinations.
Icon Meaning
This destination is a standard
6026
destination without any spe-
cial features.
This destination is protected.
6025
Once the destination memory
is full, this destination is
not automatically deleted. If
required, this can be set ma-
nually.
This destination is the current
6038
home address.

Operating rapid access

Starting using an existing destination

Destinations already in the destinations
memory are listed in the list of destinati-
ons.
! Press the button with the desired des-
tination to start route calculation.
The calculation is started. Once the cal-
culation is complete, the map display ap-
pears and directions to the destination
begin.

Scrolling in the destinations memory

7006
You can use the keys to scroll
through the list display in the direction
indicated on the arrow.
The current list page and the total num-
ber of its contents appear between the
keys.