Adjusting The Volume; Hiding The Image And Muting The Audio Temporarily (A/V Mute) - Epson EH-TW5750 User Manual

Basic Operations

Adjusting the Volume

You can adjust the volume by using the volume buttons on the remote control or on the control panel.
c
•
You can also adjust the volume from the Configuration menu.
•
When an AV System is connected to the projector and you want to adjust the volume for the AV system,
set HDMI Link to On and Audio Out Device to AV System.
Caution
Do not start at high volume.
A sudden excessive volume may cause loss of hearing. Always lower the volume before powering off, so
that you can power on and then gradually increase the volume.

Hiding the Image and Muting the Audio Temporarily (A/V Mute)

You can temporarily stop projection and mute any sound by pressing the A/V Mute button on the remote
control or by closing the lens cover. To turn the image and sound back on, press the button again or open
the lens cover.
Remote control
c
•
For movies, the image and audio continue to play even during A/V Mute. You cannot resume projection
from the point that you muted the video and audio using the A/V mute button.
•
When outputting audio from an AV system and you want to adjust the volume for the AV system, set
HDMI Link to On and Audio Out Device to AV System.
Remote control
31
Control panel
Settings - Volume
s
Settings - HDMI Link
s
Main unit
Settings - HDMI Link
s
p.53
p.53
p.53