Adjusting The Volume; Hiding The Image And Muting The Audio Temporarily(A/V Mute) - Epson EH-TW5650 User Manual

Basic Operations

Adjusting the Volume

You can adjust the volume by using the
on the control panel.
Remote control
c
•
You can also adjust the volume from the Configuration menu.
•
When an AV System is connected to the projector and you want to adjust the volume for the AV system,
set HDMI Link to On and Audio Out Device to AV System.
•
You cannot adjust the volume of Bluetooth audio devices from the projector.
Caution
Do not start at high volume.
A sudden excessive volume may cause loss of hearing. Always lower the volume before powering off, so
that you can gradually increase the volume when you next turn on the power.

Hiding the Image and Muting the Audio Temporarily(A/V Mute)

You can temporarily stop projection and mute any sound by pressing the
or by closing the lens cover. To turn the image and sound back on, press the
lens cover.
Remote control
c
•
Because a movie continues to play even when it is hidden, you cannot return to the point at which you
hid the image and muted the audio.
•
The button also switches between muting and playing the audio.
buttons on the remote control or the
Control panel
Settings - Volume
s
Settings - HDMI Link
s
33
buttons
p.68
p.68
button on the remote control
button again or open the
Main unit