Adjusting The Volume - Epson EB-590WT User Manual

Adjusting Projected Images
f
Check that the focus matches the corners (
screen.
If any areas are out of focus, use the focus lever to adjust until the
corners are the same focus.
g
) of the projected

Adjusting the Volume

You can adjust the volume using one of the following methods.
• Press the [Volume] buttons on the remote control to adjust the volume.
[ ] Decreases the volume.
a
[ ] Increases the volume.
b
• Adjust the volume from the Configuration menu.
s
Do not start when the volume is set too high.
A sudden increase in volume may cause loss of hearing. Always lower the
volume before powering off, so that you can power on and then gradually
increase the volume.
To remove the Test Pattern, press the [Esc] button on the remote
control or the control panel.
Remote control
Settings - Volume p.131
Caution
59