Copying Originals Using The Automatic Document Feeder - Konica Minolta Di 200 User Manual

Table of Contents

Advertisement

Initial Steps . . .

Copying Originals using the Automatic Document Feeder

Feed originals with the automatic document feeder.
Note the following important information!
Suitable originals for the automatic document feeder are:
Type of originals:
Original size:
Set the document guide to the size
1
of the original.
?
Are you copying originals that
are larger than A4?
§
Pull out the document feed tray
extender and the original
stopper.
2
Load up to 70 originals (80 g/m
into the document feeder. The side
that is to be copied must be up.
Do you have to load the originals
?
differently than illustrated here?
§
Define the original document
alignment. For more
information, see page 4-16.
3
Make sure that the stack of originals
does not exceed the maximum fill
height (see Ä mark on the document feeder).
4
Push the originals flush up against the feed chamber.
5
Start the copy cycle.
The originals are pulled in starting with the top sheet.
Di200
• Single sheets of smooth standard paper
• Multiple Page Feed
• 1-/2-sided originals
• with Mixed Original Detection
2
)
3
2
52.5 up to 81.4 g/m
A3 L to A5
A3L to A5 C
Extender
Original Stopper
3-7

Advertisement

Table of Contents
loading

Table of Contents