Table of Contents
Advertisement
2
DANGER
Incorrect handling of the power cable can result in fire and/or
electrical shock!
The copier is equipped with high-voltage components. Incorrect handling
of the copier's power cable may cause damage to the cable. This could
result in fire and/or cause electrical shock. Observe the following safety
precautions to prevent injury and device damage.
§
Be sure that the power cable is not damaged. If it becomes damaged,
switch off the copier immediately. Unplug the power cord. Consult your
technical representative.
§
Do not pull directly on the power cable itself when unplugging the
power cord from the power outlet.
§
Do not move the copier unless it is unplugged.
§
Never place heavy objects on the power cable.
§
Do not pull or bend the power cable.
§
Do not place the copier on cables belonging to other devices.
§
Ensure that no cables of other devices get pinched in the copier.
§
Be sure that the power cord sits correctly in the power outlet.
§
Be sure that the power outlet is visible and accessible at all times.
§
Do not use any extension cords. If you require an extension cord to
connect the copier to a power supply, contact your technical
representative.
§
Never connect the copier to a multiple-socket extension cord.
§
Unplug the power cord at least once a year. Clean off any dust that
may have accumulated on or around the contacts.
2-12
Getting to Know Your Copier
Di200
Advertisement
Table of Contents
