3
3.4
Entering the Number of Copies
Input the number of copy sets that you wish to make from your original.
§
Touch the corresponding keys on
the numeric keypad.
The number of copies is shown on
the touch screen in the upper right-
hand corner.
?
Did you enter an incorrect
number?
§
Press the [C] key on the control
panel. Enter the number of
copies again.
3.5
Starting the copy cycle
Start a copy cycle.
§
Press the [START] key on the
control panel.
The copy cycle starts.
3.6
Interrupting the Copy Cycle
For more information see Chapter 3 of the extended manual on the
CD-R.
3-4
Initial Steps . . .
Di200