Console Overview - BLADEZ Evora Owner's Manual

TIME
SPEED
DISTANCE
TOTAL DISTANCE
CALORIES (CAL)
KEY FUNCTIONS:
MODE: This key lets you select and lock on to a particular function to view.
1. AUTO ON/OFF:
The system turns on when any button is pressed or when it receives a signal input from the speed
sensor. The system turns off automatically when the sensor has no signal input and no buttons
have been pressed for approximately 4 minutes.
2. RESET:
The unit can be reset by either replacing the batteries or pressing the MODE button for 3 seconds.
3. MODE:
The computer can display one of 5 parameters; Time, Speed, Distance, Total Distance and
Calories. Pressing the MODE button repeatedly until the desired parameter is displayed. Press
the MODE button to move to the next parameter or loop through all sections manually. There
is also a SCAN display. Press the MODE button until SCAN is flashing in the lower left corner.
Under this selection, the computer will automatically display each parameter one-by-one for 3
seconds in the order of Time, Speed, Distance, Total Distance and Calories.
4. FUNCTIONS:
TIME: Press the MODE button until the pointer advances to TIME. The total working time
will be displayed.
SPEED: Press the MODE button until the pointer advances to SPEED. The speed will be
displayed either in MPH or KPH.
DISTANCE: Press the MODE button until the pointer advances to DISTANCE. Each workout
distance, total distance will be displayed.
CALORIES: Press the MODE button until the pointer advances to CALORIES. The calories
burned will be displayed.
SCAN: The following functions will be displayed in the order shown: TIME, SPEED,
DISTANCE, TOTAL DISTANCE, CALORIES (repeat).
BATTERY: This monitor uses one AA battery. If the display on the monitor is not clear, install
new battery.

CONSOLE OVERVIEW

00:00-99:59
0.0-999.9KM/H or ML/H
0.00-999.9KM or ML
0-999K
0 -999.9KCAL
17