Replacing The License Plate Light Bulb; Replacing The Auxiliary Light Bulb - Yamaha XJR1300 Owner's Manual

Replacing the license plate
light bulb
1. Remove the license plate light unit
by removing the screws.
1. License plate light unit
2. Screw
2. Remove the socket (together with
the bulb) by pulling it out.
1. License plate light bulb socket
PERIODIC MAINTENANCE AND MINOR REPAIR
EAU24310 3. Remove the defective bulb by pull-
ing it out.
4. Insert a new bulb into the socket.
5. Install the socket (together with the
bulb) by pushing it in.
6. Install the license plate light unit by
installing the screws.
Replacing the auxiliary light
bulb
If the auxiliary light bulb burns out, re-
place it as follows.
1. Remove the headlight unit by re-
1. Screw
2. Remove the socket (together with
6-31
moving the screws.
the bulb) by pulling it out.
EAU33541
6