Tail/Brake Light; Replacing A Turn Signal Light Bulb - Yamaha XJR1300 Owner's Manual

PERIODIC MAINTENANCE AND MINOR REPAIR

Tail/brake light

This model is equipped with an LED-
type tail/brake light.
If the tail/brake light does not come on,
have a Yamaha dealer check it.
6
EAU24181
Replacing a turn signal light
bulb
1. Remove the turn signal light lens
by removing the screw.
1. Screw
2. Remove the defective bulb by
pushing it in and turning it counter-
clockwise.
6-30
EAU24202
1. Turn signal light bulb
3. Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
4. Install the lens by installing the
screw.
CAUTION:
Do not overtighten the screw, other-
wise the lens may break.
ECA11190