Fuel Tank Breather Hose And Overflow Hose; Catalytic Converter - Yamaha XJ6SA Owner's Manual

INSTRUMENT AND CONTROL FUNCTIONS
Fuel tank breather hose and
overflow hose
3

1. Fuel tank breather hose and overflow hose

2. Clamp
Before operating the motorcycle:
● Check each hose connection.
●
Check each hose for cracks or
damage, and replace if damaged.
●
Make sure that the end of each
hose is not blocked, and clean if
necessary.
● Make sure that the end of each
hose is positioned inside of the
clamp.
EAU51190

Catalytic converter

This model is equipped with a catalytic
converter in the exhaust system.
WARNING
The exhaust system is hot after op-
2
eration. To prevent a fire hazard or
burns:
● Do not park the vehicle near
possible fire hazards such as
1 1
grass or other materials that
easily burn.
● Park the vehicle in a place
where pedestrians or children
are not likely to touch the hot
exhaust system.
●
Make sure that the exhaust sys-
tem has cooled down before do-
ing any maintenance work.
● Do not allow the engine to idle
more than a few minutes. Long
idling can cause a build-up of
heat.
EAU13433
NOTICE
Use only unleaded gasoline. The use
of leaded gasoline will cause unre-
EWA10862
pairable damage to the catalytic
converter.
3-17
ECA10701