Replacing The Tail/Brake Light Bulb; Replacing A Turn Signal Light Bulb - Yamaha XJ6SA Owner's Manual

Replacing the tail/brake light
bulb
1. Remove the seat. (See page
3-18.)
2. Remove the tail/brake light bulb
socket (together with the bulb) by
turning it counterclockwise.
1. Tail/brake light bulb socket
3. Remove the burnt-out bulb by pull-
ing it out.
PERIODIC MAINTENANCE AND ADJUSTMENT
EAU47021
1
1
1. Tail/brake light bulb
2. Tail/brake light bulb socket
4. Insert a new bulb into the socket.
5. Install the socket (together with the
bulb) by turning it clockwise.
6. Install the seat.
2
6-38
Replacing a turn signal light
bulb
1. Remove the turn signal light lens
by removing the screw.
2
1. Turn signal light lens
2. Screw
2. Remove the burnt-out bulb by
pushing it in and turning it counter-
clockwise.
EAU24204
1
6