Setting The Countdown Timer - AEG COMPETENCE B 8100 User Instructions

Operating Instructions

Setting the Countdown Timer

The countdown timer can be set both when the oven is in use as well as
when no oven function is selected.
0 1. If necessary, switch on the appliance using the mains button.
2. Press the clock W button repeatedly until the function indicator is at
COUNTDOWN.
The COUNTDOWN function indicator flashes. The temperature/time dis-
play indicates "0.00".
3. Enter the required time within 5 seconds using the + button.
4. After a few seconds, the COUNTDOWN function indicator changes to
continuous illumination. The countdown timer starts running. The min-
utes set are counted down backwards.
5. When the time set on the countdown timer has expired, an acoustic
signal sounds for approx. two minutes.
6. Press the clock W button to switch off the signal.
The COUNTDOWN function indicator goes out.
7. If necessary, switch off the appliance using the mains button.
Changing the Setting on the Countdown Timer
1. Using the clock W button, re-select the COUNTDOWN function.
0
2. Set the new time required within 5 seconds using the + or - buttons.
3. After a few seconds, the COUNTDOWN function indicator changes to
continuous illumination. The countdown timer starts to run with the
new time.
Switching Off the Countdown Timer Early
1. Using the clock W button, re-select the COUNTDOWN function.
0
2. Within 5 seconds press the + and - buttons simultaneously.
"0.00" appears in the display. After a few seconds, the COUNTDOWN
function indicator goes out and the temperature/time display indicates
the current time again.
The maximum time that can be set on the countdown timer is
3
1 hour 30 minutes.
If the oven is in use, after the countdown timer has been set, the tem-
perature/time display indicates the selected temperature again. The
countdown timer continues to run in the background.
24