Setting The Oven Timer - AEG COMPETENCE D4100-1 Operating Instructions Manual

During the operation of the Countdown, the
remaining time period will be shown in the display.
The 'Countdown' will sound intermittently for up to
2 minutes at the end of the timed period. The
sound can be stopped by pressing any button.
TO CANCEL THE COUNTDOWN
If you change your mind and want to cancel the
'Countdown', press the Selector Control button
until the 'Countdown' indicator (
then the decrease control ( - ) until 0 . 00 shows in
the display as Fig.
indicator ( ) will continue to flash for a few
seconds and then return to the time of day.

3. SETTING THE OVEN TIMER

CONTROL
The main oven only can be automatically timed.
When using the timer control for the very first time,
it is advisable to let it operate while you are at
home. The displays can be checked to show that
it is operating correctly and you will feel confident
to leave a meal to cook automatically in the future.
A) TO SET THE TIMER TO SWITCH ON
AND OFF AUTOMATICALLY
i) Ensure the electricity supply is switched
ON and that the correct time of day is
displayed, e.g. 9.a.m. as Fig. 6.
ii) Place food in oven.
iii) To set the length of cooking time, press the
Selector Control button (
Time' indicator is illuminated (
the increase control ( + ) until the required
length of cooking time is displayed, e.g. 2
hrs 15 mins as Fig. 7.
depress the decrease control ( - ) until the
correct time interval is achieved.
The maximum cooking time is 10 hours.
iv) Release the buttons. The 'Cook Time'
indicator ( ) will be illuminated.
Remember, this must be completed within 5
seconds of first pressing the Selector Control
button.
) flashes and
5. The Countdown
) until the 'Cook
) . Press
If necessary
Fig. 5
Fig. 6
Fig. 7
9