Initial Cleaning - AEG COMPETENCE B 8100 User Instructions

Operating Instructions
Changing the Time
The time setting can be changed with the appliance either switched on
or off.
The time set is displayed in the temperature/time display.
1. Press the W button as often as necessary until the TIME function indi-
0
cator flashes.
2. Adjust the time as described above.

Initial Cleaning

Before using the oven for the first time, you should clean it thoroughly.
You can switch on the oven light to make cleaning easier.
0 1. Switch on the appliance using the mains button.
The mains pilot light above the button illumi-
nates.
2. Press the oven lighting L button.
3. Remove all accessories and the side rails and clean with warm water
and washing-up liquid.
4. Also wash out the oven with warm water and washing-up liquid and
dry it.
5. Wipe off the front of the unit with a damp cloth only.
Tip: Use commercially available cleaner for stainless steel fronts, at the
3
same time these also form a protective film against finger marks.
Important: Do not use any caustic, abrasive cleaners! The surface could
1
be damaged.
16