Front Panel; How To Operate The Disk; Important Safety Precautions - Korg SQD-8 Owner's Manual

function indicates that some data is
memorized in the track.
When "PLAY" flashes, it indicates that
the track is ready to be played, if
ST ARTISTOP ( .. / . ) key
4D
is pushed.
During play, "Play" is lit continuously.
When "REC" is flashing, it indicates that
the track is ready to be recorded. During
recording, "REC" is lit continuously, if
you begin recording and playing keyboard
and "REC" continues to flash.it means no
MIDI data is being received on that track .
Please check MIDI channel assignment.
When "ERASE" is flashing, it indicates
that the track is ready to be erased.
The
*
mark besides the track number in
utility-function indicates onloff of each
mode. (It corresponds with the TRACK
KEY number.)
o
FUNCTION-MARK INDICATION
It indicates which function is selected.
The function indicated by ( .. ) is the
funl::tion selected at that time.
• • • • • • • • • • • • HOW TO OPERATE THE DISK • • • • • • • • • • • •
1.
Never touch the magnetic sheet. It can
damage data and make it impossible to read
or write to the disk.
and avoid storing them in a way that makes
them fold or bend. If you 'keep them right
under the direct rays of the sun, they may
change shape and become unusable.
2. Do not fold or bend the disk.
3. When the disk is not in use, put it inside the
envelope and keep it standing on a shelf.
You must keep the disk standing straight,
4. Do not put the disk near magnetism like a
loudspeaker. The data written in the disk
will be destroyed.
IMPORTANT SAFETY
PRECAUTIONS
.LOCATION
Do not use thiS unit for extended periods of time where
it
is exposed to;
• directsunlight
• I"tren-. of temper,ture or humidity
• und
or dll$t
.POWER SUPPLY
• Use only with rated AC Voltage. If vou will ba using this
unit in an area having a different voltage, be sure to use
a proper VOltage converter,
• To help prevent noise end degreded sound quality, avoid
using the
I8lTIe
outlet as other equipment or branching
off extension cords shared by other ll'Qulpment.
.INTERFERENCE
This unit uses microc:omputllr circuitry, LIke all such devic8l,
it is subject to interference from neerbv electrical devic8l
like fluorescent tllmps, appliances with motors, and 10 on.
If operation becomes erratic or unpredictable, or if there is
no re'1pOflUl wherl VOU pr$\S
I
tv..Inor. on thl unit, thin
intlrference may be the cause. If this occurs, try turning
off thll pOwer, then turning it back on again. Thil rllllts
(initializes) the microcomputer.
-4-
.HANDLE GENTL VI
Don't drop this unit or use more force than nec:e5Sarv to
operate switches and kevl,
.CLEANING EXTERIOR SURFACES
Wipe the 1)lleTior lightly with a clean, dry soft cloth to
remove dun
and
dJrt. NeVltr use strong
solvents
like
benZine,
peint thinner, rubbing compoynd flammable polishing agents.
.KEEP TH'S MANUAL
Keep this manual ill a nf. place for future reference.