DATA FILE (TRANSMISSION)
Exclusive data saved in QD is again loaded in
sound sources such as synthesizer, etc. If it is
connected in a line through THRU, data can be
loaded without connecting the various kinds of
instruments one by one with the SQD-8.
Confirm that power supply of connected
sound source is also on.
-@ of p. 17 right
@ Put synthesizer in the condition to be able to
to receive it. (See explanatory note to handle
various kinds of instruments.)
LOAD starts when LOAD key 0is pushed.
MEASURE indication of display changes,
LOAD-+FILE. Red is lit in TEMPO LED
When LOAD finishes, both indication
The following indication shown in MEASURE
indication display means error.
QD is not set in the body. Please set
Err 2: SAVE is unavailable as nail for
protection is broken. Please prepare
QD, the nail of which is not broken.
Err 3: LOAD is unavailable as data in QD is
damaged. (or disk is bad).
Err 4: SAVE is unavailable as disk is bad.
Err 5: QD volume is insufficient.
prepare new QD.
When these indications appear in data file
(transmission/receiving), conduct operation
of data file after pushing RESET (
EXAMPLE OF SETTING
(As to audio output see text of MIDI MIN!.)
Sound source of synthesizer, etc.
V Setting to coordinate tempo (clock) of drum-
(Set clock ofSQD-8 at external. See p. 17.)