Table Of Contents; Sqd-8 Basic Knowledge - Korg SQD-8 Owner's Manual

8 track midi recorder
Table of Contents

Advertisement

CONTENTS
........ . . . . . . . . . . . . . . . . . . .
2
Key Transpose .....................
15
..............................
3
Echo Back .........................
15
How to Operate the Disk ................
4
..........................
16
...........
4
17
SQD-8 Basic Knowledge ................
5
.......................
17
Recording .............................
6
...............
18
Example of Setting .................
6
Load From Disk ....................
18
Real Time Recording ................
6
19
Metronome ......................
7
19
Step Recording .....................
9
Play
.. . . . . . . . . . . . .. . . . .. . .. . . .. . ..
19
..............................
10
............. . . . .
19
Single Erase .......................
10
..............................
20
All Erase ..........................
11
20
............. . . . . . . . . .
11
................
20
. . . . . . . . . .
12
About the Data Slider ...............
21
Data Mix ..........................
12
21
Volume Control ....................
13
Specs and Options ......................
22
Repeat ............................
14
Rear Panel ............................
23
Befol'e putting on the power switch at the rear panel, be sure to confirm that AC adaptor, MIDI
cable, and others are correctly set.
• • • . • • • . . • • . • SQD-8 BASIC KNOWLEDGE· • • . . • • • • • • . •
SQD-8 has two input methods, i.e. real time
recording and stepwrite recording.
REAL TIME RECORDING
In real time recording the SQD-8 records
much like a tape-recorder. The difference is
that on the SQD-8 the pitch is not changed,
if the playback speed is varied, and MIDI
DATA like control-change and program-
change can be memorized along with notes.
STEP-RECORDING
Step-recording on the SQD-8 inputs pitch
and velocity from the keyboard and timing
values by selecting a value on the SQD-8.
This method resembles data input to a
computer. Music which is impossible to play
can be played by the SQD-8 by using step-
recording.
Note: Once the power supply of the SQD-8 is
shut ofT, all the already recorded data will
be completely erased.
Don't fail to
conduct the save operation (see p. 17)
before cutting off the power supply.
To put power supply on, turn the switch
on rear panel power supply, after
confirming that AC cord, MIDI CABLE,
etc. are correctly connected.
-5-

Advertisement

Table of Contents
loading

Table of Contents