Key Transpose; Echo Back - Korg SQD-8 Owner's Manual

I
KEY TRANSPOSE
I
This function transposes the data of already
recorded play with note number from an outside
MIDI keyboard, etc. Connect keyboard, etc. with
MIDI IN.
Q)
Push FUNCTION select keyf)to set function
mark (
~
) display to UTILITY. (utility
function)
®
Push "KEY TRANS" TRACK 4 key
0.
*
comes out in the TRACK 4 indication
display.
®
When a key is pushed in a range of one
octave high or low from C4 (Do in the center)
of the keyboard in a stop condition of play
function (See p. 20.), the tone is transposed
by the degree of the key.
For example, when the keyboard of
©
is
pushed in the music of F (F major), it is
transposed to Bb (B major). When the
keyboard 6 is pushed in the music of Am
(A minor), it is transposed to Em
(E
minor).
In otherwords the key is transposed in
relation to C.
*
If a keyboard is pushed before the music
returns to the beginning, when repeat is on,
the music repeated next will be transposed.
*
Please take care, as tone will always be
transposed, if a key is pushed, while key
transpose is on
(*
comes out in TRACK
0
indication display in utility function). In
order to stop this function push "KEY
TRANS" TRACK 4 key in utility function.
*
It is impossible to transpose during real time
or step recording.
I
ECHO BACK
I
If echo back is on, a mix of the MIDI signal input
from MIDI IN and the MIDI signal output from
the memory of SQD-8 will be output from MIDI
OUT terminal of SQD-8.
Master Keyboard
H
SQD-8
~
OUT IN OUT IN
For example, while hearing tracks on SQD-8,
you can play and record with master keyboard.
Q)
Push FUNCTION select keyf) to set function
mark (
~
) display to UTILITY. (utility
function)
®
Push "ECHO BACK" key TRACK0key.
*
is displayed in the track
0
indication
display.
*
In order to stop the function of echo back,
conduct operation
®
in utility function.
*
disappears from the TRACK
0
indication
display and the function of echo back ceases.
When clock is external, it is always off,
not on.
*
See p. 7
®
as to the function of
metronome.
If track is set to recording function,
metronome is automatically on. It is
automatically off, when recording is
finished or cancelled.
- 15-