Download Print this page

Korg SQD-8 Owner's Manual Page 4

8 track midi.
Hide thumbs

Advertisement

I
FRONT PANEL
I
o
DISPLAY
Seep. 3.
f)
FUNCTION SELECT KEY
Chooses the function with the up and down
keys. The right function mark (
~
) of the
display shows the selected function.
8
TEMPO LED
In play mode or real time-recording mode,
the first beat is shown in red and the other
beats are shown in green in accordance with
tempo. In QD mode red indicates exclusive
data-transmission-time and green indicates
the receiving time.
o
MEASURE MEMORY KEY
This is used to stop play in the middle of the
music and designate the measures to be
repeated.
o
BEAT KEY
This is used to set the beat of the metronome.
o
MIDI-CH KEY
This is used to set the MIDI channel.
o
ERASE TRACK KEY
This is used for erasure.
o
ERASE ALL KEY
This is used to erase aU data in SQD-8.
o
LOAD KEY
In Data File, this is used to transmit the
system exclusive-data (tone of synthesizer,
etc.), in sequencer mode, data on QD (quick-
disk) is put into SQD-8 internal memory.
4D)
SAVE KEY
This stores internal memory of SQD-8 to the
QD.
4D
DATA FILE KEY
This is used to receive the system exclusive-
data from external MIDI devices.
When in the Step Recording Function, it will
be used as the Tie Key.
CD
TRACK KEY (Note Key. Utility Key)
-2-
1.
(c,
)
DATA MIX
This is used to select track
(1),
to
designate whole note in step-recording
and for data-mix in utility-function.
2.
(
d )
VOLUME CONTROL
This is used to select track
(2),
to
designate half notes in step-recording
and to select volume-control in utility
function mode.
3.
( : ) REPEAT
This is used to select track
(3)
and to
designate quarter notes in step-
recording and to switch repeat on or off
in utility-function.
4.
(
_r )
KEY TRANS
This is used to select track
(4),
to
designate eighth notes in step-recording
and to switch key transposition on or off
in utility-function.
5.
(
:=)
ECHO BACK
This is used to select track
(5),
to
designate sixteenth notes in step-
recording and to switch echo back on or
off in utility-function.
6.
(
:= )
METRONONE
Thi~ is used to select track
(6),
designate
thirty-second notes and to switch
metronome on or off in utility-function.
7. (
,) QUANTIZE
This is used to select track
(7),
to
designate dotted notes in step-recording
and for quantization in utility-function.
S. (
JJJ )
CLOCK INTIEXT
This is used to select track (8), designate
triplet in step-recording and to set the
operation to either internal clock or
external clock in utility-function.

Advertisement

   Related Manuals for Korg SQD-8

Comments to this Manuals

Symbols: 0
Latest comments: