Korg SQD-8 Owner's Manual page 21

8 track midi recorder
Table of Contents

Advertisement

I
REAR PANEL
I
fIi)
Power switch
fll
DC-IN terminal
Be sure to use the adaptor attached as
accessory.
o
MIDI THRU terminal
This terminal transmits the data received by
MIDI IN.
@)
MIDI OUT terminal
This terminal transmits the data from SQD-
8.
fD
MIDI IN terminal
This tet'minal receives the data from the
outside MIDI device.
f» Headphone-jack
By connecting the headphone with the mini-
play (8.5<1», you can monHodhe metoronome
sound.
I
ADDITIONS
I
Data File (Receiving)
If you have a disk containing system exclusive information on it, then you must reload the data
from the disk to the internal memory before attempting to save new data on the disk. If you do
not, new data will overwrite the data previously stored.
When using tie function and you make a mistake, it is easy to correct. For example, you want to
input
J
-tie-
J=
but instead you select a
J -
tie-
J-
simply reenter correct timing data before
inputting new notes from the MIDI keyboard.
Basic Precautions
Transport
To protect the disk drive while transporting this unit, ALWAYS insert the supplied head
protection sheet before moving this unit.
NOTICE:
Korg products are manufactured under strict specifications and voltages required by each
country. These products are warranted by the Korg distributor only in each country. Any Korg
product not sold with a warranty card or carrying a serial number disqualifies the product sold
from the manufacture's/distributor's warranty and liability. This requirement is for your own
protection and safety.
- 23-

Advertisement

Table of Contents
loading

Table of Contents