Westinghouse PSP632 User Manual page 11

Setting the cooking end time
1. Check the clock displays the correct time of day.
2. Select the desired oven function and temperature. The
oven indicator light will glow and the heating source will
come on.
3. Press the "mode" button until the "end time" indicator
begins flashing.
4. Enter the time of day you want to finish cooking by
pressing the – or + buttons. 5 seconds after the last
change, the "end time" indicator will stop flashing and the
current time of day will be displayed.
Setting the delayed start cooking time
1. Program the "cook time" and "end time" as described
in the relevant sections. Once both the "cook time" and
"end time" have been set, the "cook time" and "end time"
indicators will stop flashing and the current time of day
will be displayed.
To check or cancel settings
1. To check your settings, press the "mode" button until the
setting you want is displayed. A red indicator light will
flash next to the mode (cook time, end time etc) that is
currently on display.
2. To cancel "delayed start" press the "mode" button until
the indicator next to "end time" flashes. Press and hold
the – button until the clock no longer reverses (you will
hear a beep). If you have left the temperature and function
knobs at a setting the oven will start once the "end time"
indicator stops flashing.
3. To cancel "auto shut off" press the mode button until the
indicator next to "cook time" flashes. Press and hold
the – button until the clock no longer reverses at ("0:00"
and you will hear a beep). This automatically cancels
"delayed start". If you have left the temperature and
function knobs at a setting, the oven will start once the
"cook time" indicator stops flashing. Because you have
cancelled "auto off" the oven will continue to heat until
you manually turn it off.
On completion of cooking
The oven will turn off, the timer will beep and the "end time"
and/or "cook time" indicators will flash.
1. Turn the function and temperature controls to the off
position.
2. Press any button to stop the timer from beeping.
Switching the clock display ON and OFF
1. Press any two buttons together for 2 seconds to switch
'off' the display.
2. Press any button to switch the clock display 'on' again.
NOTE: If a timer mode is set, then it is not possible to switch
the display off.
11