Table of Contents
Advertisement
CentreWare Internet Services
CentreWare Internet Services (Internet Services) is the embedded HTTP server application that resides
in the machine. Internet Services allows an administrator to change network and system settings on
the machine from the convenience of their workstation.
Many features available on your machine will need to be set via the machine and CentreWare Internet
Services.
System Configuration
To use CentreWare Internet Services, you need to enable both TCP/IP and HTTP on the machine. See
Configure Static IPv4 Addressing using the Machine User Interface
IPv4 Addressing using the Machine User Interface
To enable HTTP at the machine:
Note
HTTP is enabled by default.
Press the Machine Status button.
1.
2.
Use the up/down arrows to select Network Settings.
3.
Enter the Administrator password.
4.
Use the up/down arrows to select HTTP Activate.
5.
Select On.
6.
Press OK. The Saved screen will appear and then the Reboot Required screen will appear.
7.
Press the power switch off, wait two seconds and press the power switch back on.
Administrator User Name and Password
Many of the features available within CentreWare Internet Services will require an Administrator user
name and password. The default user name is admin and the default password is 1111.
Internet Services Administrator Access
To access Internet Services Properties and change settings you will need to login as Admininstrator.
1.
At your workstation, open the web browser and enter the IP Address of the machine in the
Address Bar.
2.
Press Enter. The Home page appears.
There are two ways to access Internet Services with the administrator login:
•
Select Login at the top of the screen
•
Select the Properties icon
3.
Enter the Administrator User Name (admin) and Password (1111).
4.
Click Login. Click Properties.
on page 28, or
on page 29.
Xerox WorkCentre 3315DN/3325DN/3325DNI
System Administrator Guide
CentreWare Internet Services
Configure Dynamic
23
Advertisement
Table of Contents
