Xerox WorkCentre 3315DN System Administrator Manual page 179

Problem
I cannot access Internet Services.
Action
Incorrect IP Address
In certain situations you may find the machine is
configured with an incorrect IP Address or
displays a network error. There are several
possible causes of this:
1. When the machine boots up it discovers that
it has been configured with an IP Address
that is owned by another machine.
Solution - Configure the machine with a unique
IP Address.
2. The machine cannot connect to the DHCP or
BootP server. The machine will use AutoIP to
establish an address.
Solution - Check the DHCP or BootP server works
correctly. Configure the printer with a static IP
Address.
3. The printer has an IP Address of 169.254.x.x.
Solution - The machine cannot connect to the
DHCP or BootP server. The printer has used
AutoIP to establish an address. Check the DHCP
or BootP server works correctly. Configure the
printer with a static IP Address.
Note AutoIP (AutoNetting) When DHCP or
BootP are enabled on the machine, AutoIP is
automatically enabled. If a DHCP or BootP
server does not respond with an IP Address,
the machine will use AutoIP to configure its
own IP Address in the 169.254.0.0 range.
When the machine connects to the DHCP or
BootP server it will obtain a dynamic IP
Address as normal.
If the machine is configured with a static IP
Address, it will not use AutoIP.
1. Ensure that the Xerox machine is configured
with a valid IP Address.
2. Ensure HTTP Activate is enabled within the
Machine Status > Network Settings area at
the User interface (UI) screen.
3. Within your web browser, set the option to
bypass the proxy server for local addresses.
Xerox WorkCentre 3315DN/3325DN/3325DNI
System Administrator Guide
Connectivity
179