Table of Contents
Advertisement
e.
Select the required options for Lighten/Darken and Contrast.
8.
Select Scan to E-mail in the left hand menu.
a.
Ensure Scan to E-mail is enabled.
b.
Enter a valid e-mail address in the Default From: Address field.
c.
Enter required information in the Default Subject field.
d.
Check the Use default message in scan to email checkbox to change default mail text.
e.
In the Default Message field, enter text that you want to appear in the body of e-mails sent
from the machine.
For the Smart Key Address #1 - Smart Key Address #6 fields enter details of default fixed
f.
details for each numerical key. The default settings for commonly used addresses are already
configured for .com, .org, .net, .gov and .tv.
g.
Select the checkboxes to enable Edit From Address and Replace From Address if required.
h.
Check the Auto Sent To Self checkbox to automatically add the senders From: address to the
recipient list.
i.
Select an option from the Print Confirmation Sheet drop-down menu:
•
On Errors Only - This setting will produce a Confirmation Sheet only when error
information is indicated.
•
Always - This setting will produce a Confirmation Sheet that will provide error
information and indication that the job has reached the recipient(s).
•
Never - this setting will not produce a Confirmation Sheet.
9.
Select E-mail Text Attachment if this option is required.
10. Select Apply to save the changes.
11. Select OK when the acknowledgement message displays.
Xerox WorkCentre 3315DN/3325DN/3325DNI
System Administrator Guide
E-mail Addressing
107
Advertisement
Table of Contents
