Band Edge Beeper - Yaesu VX-5R Operating Manual

The VX-5R will automatically "beep" when a band edge is encountered during scanning
(either in standard VFO scanning or during PMS operation). You may disable this feature,
if it is annoying, without disabling the keypad beeper (the default condition for this feature
is "ON").
The procedure for disabling the Band-Edge Beeper is:
•
Press the [ F/W ] key, then press the [ BAND ( SET ) AR ] key, to enter the Set mode.
‚
Rotate the DIAL to select Menu #21 ("EDGE BEEP
ƒ
Press the [ BAND ( SET ) AR ] key to enable changing of this Menu item.
„
Rotate the DIAL to set this Menu item to OFF.
...
When you have made your selection, press the PTT key to save the new setting and
exit to normal operation.
VX-5R O
PERATING
B E
AND DGE
M
ANUAL
B
EEPER
EDGE BEEP"). EDGE BEEP EDGE BEEP EDGE BEEP
Scanning
51