Installation Of The Su-1 - Yaesu VX-5R Operating Manual

Installation of the SU-1

Make sure that the transceiver is off. Remove the hard or soft case, if used.
Remove the battery pack.
Locate the connector for the SU-1 under the caution seal in the battery compartment
on the back of the radio, just peel off the caution seal.
Align the connector on the SU-1 with the transceiver's connector and gently press the
unit into place.
Affix the new (supplied) caution seal, and replace the battery.
Installation is now complete.
The Barometric Pressure/Altitude features of the optional SU-1 are designed to be
supplemental aids for the information of the user, and are not intended to be a
substitute for accurate, calibrated Barometer or Altimeter devices used for naviga-
tion critical to personal safety.
72
Important Note
VX-5R O
PERATING
M
ANUAL