Memory Recall; Home Channel Memory - Yaesu VX-5R Operating Manual

•
While operating in the VFO mode, press the [ MR ( SKP ) SC ] key. The "
will show that you are now in the Memory Recall mode.
‚
Rotate the DIAL to select the desired channel.
ƒ
To return to the VFO mode, press the [ VFO ( DW ) SC ] key.
An easy way to recall memories is to key in the memory channel number,
then press [ MR ( SKP ) SC ] .
For example, to recall memory channel #14, press
A special one-touch "HOME" channel is available (one for each of the designated "VFO"
bands) to allow quick recall of a favorite operating frequency on each band. Memory
storage is simple to accomplish:
•
Set Menu Item #24 ("HOME
(see page 65).
‚
Select the desired frequency, while operating in the VFO mode. Be sure to set up any
desired CTCSS or DCS tones, as well as any desired repeater offset. The power level
may also be set at this time, if you like.
‚
Press and hold the [ F/W ] key for one second.
ƒ
While the memory channel number is blinking, just press the [ HM/RV ( EMG )] key.
The frequency and other data (if any) will now be stored in the special HOME channel
register.
„
You may repeat this process on each of the other "VFO" bands.
...
To recall the HOME channel, press the [ HM/RV ( EMG )] key momentarily while oper-
ating in the VFO or MR mode. The HOME channel corresponding to the frequency
range on which you are currently operating will automatically be selected (i.e. if you
are operating on a memory channel in the Aviation band, the "Aviation Band Home
Channel" will be selected).
Note that the UHF HOME channel is the one used during "Emergency"
operation. See page 37 for details regarding this feature.
VX-5R O
PERATING
M
EMORY
HOME C
HANNEL
HOME/REV HOME HOME REV REV") to "HOME REV
HOME REV
M
ANUAL
Memory Mode
R
ECALL
M
EMORY
HOME" if it is not already set to that option HOME HOME
HOME
MR MR
MR MR MR
" indicator
.
43