Cloning - Yaesu VX-5R Operating Manual

The VX-5R includes a convenient "Clone" feature, which allows the memory and configu-
ration data from one transceiver to be transferred to another VX-5R. This can be particu-
larly useful when configuring a number of transceivers for a public service operation. Here
is the procedure for Cloning one radio's data to another:
Turn both radios off.
Connect the optional CT-27 cloning cable between the MIC/EAR jacks of the two
radios.
Press and hold the [ F/W ] key while turning the radios on. Do this for both radios (the
order of switch on does not matter). "
both radios when the Clone mode is successfully activated in this step.
On the Destination radio, press the [ MR ( SKP ) SC ]
key ("
Press the [ VFO ( DW ) SC ] key on the Source radio;
" " will appear on the Source radio, and
the data is transferred.
If there is a problem during the cloning process,
"
cable connections and battery voltage, and try again.
If the data transfer is successful, "
pear on both displays. Turn both radios off and dis-
connect the CT-27. You can then turn the radios back on, and begin normal operation.
VX-5R O
PERATING
" will appear on the LCD).
" will be displayed. Check your
M
ANUAL
" will appear on the displays appear on
" will reap-

Cloning

59