Yaesu VX-5R Operating Manual page 69

Set Item 33
Function: Program and activate the CW Identifier (used during ARTS operation).
CW IDer Programming:
After selecting Menu Item 33, press the [ BAND ( SET ) AR ] key momentarily.
Turn the DIAL one click to change the display from OFF to ON (CW IDer ON).
Press the [ BAND ( SET ) AR ] key momentarily, then turn the DIAL to select the first
letter/number of your callsign, and press the [ BAND ( SET ) AR ] key momentarily to
save the first letter/number.
Repeat the previous step as necessary to complete your callsign, pressing the
[ BAND ( SET ) AR ] key after each entry.
Press the PTT key momentarily to save the new setting and exit to normal operation.
Set Item 34
Function: Select the Spectrum Analyzer Sweep mode.
Available Values: SINGLE/CONTINUE
Default: SINGLE
SINGLE: The transceiver sweeps the current band once.
CONTINUE: The transceiver sweeps the current band repeatedly until the Spectrum Ana-
lyzer is turned off
Set Item 35
Function: Select the Smart Search Sweep mode.
Available Values: SINGLE/CONTINUE
Default: SINGLE
SINGLE: The transceiver sweeps the current band once in each direction starting on
the current frequency. All channels where activity is present (up to 15 in
each direction) are loaded into the Smart Search memories. Whether or not
all 31 memories are filled, the search stops after one sweep in each direc-
tion.
CONTINUE: The transceiver makes a sweep in each direction as with the "SINGLE"
mode, but if all 31 channels are not filled after the first sweep, the radio
continues sweeping until they are all filled.
Set Item 36
Function: Select the Operating mode.
Available Values: AUTO/N-FM/AM/W-FM
Default: AUTO (Mode automatically changes according to operating frequency)
Set Item 37
Function: Select the Control Locking lockout combination.
Available Values: KEY/DIAL/PTT/KEY+DIAL/KEY+PTT/DIAL+PTT/ALL
Default: KEY
VX-5R O
PERATING
M
ANUAL
Set Mode
67