Yaesu VX-5R Operating Manual page 68

Set Mode
Set Item 29
Function: Select the Tone Encoder and/or Decoder mode.
Available Values: OFF/TONE/TONE SQL/DCS
Default: OFF
TONE: CTCSS Encoder
TONE SQL: CTCSS Encoder/Decoder
DCS: Digital Coded Squelch Encoder/Decoder
Set Item 30
Function: Setting of the CTCSS Tone Frequency
Available Values: 39 standard CTCSS tones
Default: 100 Hz
In this mode, press the [ 2 ( CD ) TAG ] key (not PTT) to save the new setting
and exit to normal operation.
Set Item 31
Function: Setting of the DCS code.
Available Values: 104 standard DCS codes.
Default: 023
In this mode, press the [ 2 ( CD ) TAG ] key (not PTT) to save the new setting
and exit to normal operation.
Set Item 32
Function: Programming the DTMF Autodialer.
DTMF Autodialer Programming:
After selecting Menu Item 32, press the [ BAND ( SET ) AR ] key momentarily.
Rotate the DIAL to select the autodial memory number you want to store (9 memories
are available).
Press the [ BAND ( SET ) AR ] key momentarily, then key in the phone number you want
to store (maximum: 16 digits).
If you make a mistake, press the MONI key twice to clear the current digit and re-enter
the correct number.
After entering the final digit, press the PTT key momentarily to save the new setting
and exit to normal operation.
66 VX-5R O
PERATING
M
ANUAL