Start The Dishwashing Cycle; Changing/Interrupting/Aborting A Dishwashing Cycle; Setting Or Changing The Start Delay - Husqvarna CARDINAL 5120 User Instructions

Start the dishwashing cycle

1. Check that the dishes and cutlery are stacked in
the dishwasher in such a way that the spray arms
are free to rotate.
2. Turn on the tap fully.
3. Close the door.
4. Press the ON/OFF button.
The ON/OFF button indicator will become illumi-
nated.
5. Press the relevant button for the cycle required
(see "Cycle Table"). The cycle display will become
illuminated. The selected cycle will begin after
approximately 3 seconds. The remaining time for
the cycle will be shown in the multi-display.
The remaining time for the cycle is adjusted
3
according to amount of dishes, degree of
soiling, etc.
If an error message is displayed in the multi-
3
display after the cycle has begun, please
read the section "What to do if...".
Changing/interrupting/aborting a
dishwashing cycle
Only change or interrupt a dishwashing cycle
3
that is in progress if it is absolutely neces-
sary. After the appliance has been closed
again, the air that has entered will be heated
significantly and expand. As a result, water
may collect in the base of the appliance and
trigger the anti-flood system.
Changing a dishwashing cycle
If you would like to change the dishwashing
3
cycle in the first 3 seconds after having
selected a cycle, briefly press the button for
the new dishwashing cycle.
If you would like to change the dishwashing cycle
after this time, proceed as follows:
1. Press the button for the new dishwashing cycle
and hold it down.
The indicator for the dishwashing cycle that is cur-
rently running will flash.
After several seconds only the indicator for the
new dishwashing cycle will be flashing.
2. Release the cycle button.
The newly selected dishwashing cycle will begin.
Interrupting the dishwashing cycle by
opening the dishwasher door
Hot steam may escape when the door is
1
opened. There is a risk of scalding. Open the
door carefully.
1. Open the door of the dishwasher.
The dishwashing cycle will stop.
2. Close the door.
The dishwashing cycle will continue.
Aborting the dishwashing cycle
1. Press function buttons 2 and 3 simultaneously and
continue to hold them down.
The cycle display for the current cycle will flash for
several seconds and then cease to be illuminated.
2. Release the function buttons.
The dishwashing cycle has been aborted.
Turning off the dishwasher will only interrupt
3
a selected dishwashing cycle, not abort it.
The dishwashing cycle will recommence
after turning the dishwasher back on again.

Setting or changing the start delay

Using the start delay timer you can adjust when
within the next 19 hours the dishwashing cycle is to
begin.
Setting the start delay:
1. Press the ON/OFF button
2. Continue pressing the
of hours until the dishwashing cycle is to start is
flashing in the multi-display.
3. Press the button for the desired dishwashing
cycle.
The length of the selected dishwashing cycle will
flash for a moment in the multi-display, and then it
will display the selected starting time again.
As soon as the number of hours is displayed with-
out flashing, the start delay has been activated.
The dishwashing cycle will start automatically fol-
lowing a countdown of the hours set.
Changing the start delay:
As long as the dishwashing cycle has not started, you
can still change the start delay set by pressing the
I
button.
Cancelling the start delay:
As long as the dishwashing cycle has not begun you
are able to cancel the start delay. Continue pressing
I
the button until the length of the selected dish-
washing cycle appears in the multi-display. The
selected dishwashing cycle will begin immediately.
Changing the dishwashing cycle after the
start delay has been set:
As long as the dishwashing cycle has not started, you
can still change the start delay set by pressing a
cycle button.
1. Press the button for the new dishwashing cycle
and hold it down.
First the indicator for the dishwashing cycle that
has just been selected will flash.
After several seconds only the indicator for the
new dishwashing cycle will be flashing.
I
button until the number
23