Download Print this page

Adding Rinse Aid; Adjusting Rinse Aid Dosing - Husqvarna CARDINAL 5120 User Instructions

Hide thumbs

Advertisement

Adding rinse aid

If you are using dishwasher detergent and rinse aid
separately, add the rinse aid:
Prior to using the dishwasher for the first time
F
When the
indicator on the control panel is
illuminated.
The rinse aid compartment is on the inside of the
dishwasher door.
1. Open the door.
2. Press the rinse aid compartment release button
with your finger.
3. Fully open the rinse aid compartment lid.
4. Fill with rinse aid exactly up to the level marked
"max"; this corresponds to a quantity of approx.
140 ml.
5. Close the lid and press until it locks into place.
6. Wipe up any spilt rinse aid with a cloth. Otherwise
too much foam will be formed during the wash.

Adjusting Rinse Aid Dosing

As the dishes are washed rinse aid is
3
released from the dispenser into the wash
water. The dose is factory set at 4, and can
be adjusted from 1 to 6. Only change the set-
ting if streaks, milky spots or dried on water
marks are visible on glasses or crockery.
1. Open the door of the dishwasher.
2. Press the rinse aid compartment release button
with your finger.
3. Fully open the rinse aid compartment lid.
4. Set the dose level.
5. Close the lid and press until it locks into place.
6. If rinse aid has run out, wipe up with a cloth.
15

Hide quick links:

Advertisement

loading

  Related Manuals for Husqvarna CARDINAL 5120