Configuration
Set this product in one of the standalone modes to control it without a DMX controller.
1) Connect this product to a suitable power outlet.
(Standalone)
2) Turn this product on.
Never connect a product that is operating in any standalone mode to a DMX string
connected to a DMX controller. This is because products in standalone mode may
transmit signals that could interfere with the DMX signals from the controller.
To control the product in standalone mode, press <FUNCTION SELECT> until the
Button Menu
Control Panel displays NAn. Then, simply use the button menu on the back of the
product. Each button serves a different function, as detailed below.
Dimmer
Control Panel
Shutter
Affects brightness of the light. Press
When NAn is displayed, it is in
Turns light on and off. Press ON to
and hold either MAX to brighten or
Manual Mode. When 001 is
turn on and BLACK OUT to turn off.
MIN to darken, from 0~100%.
displayed, it is in DMX Mode.
Up/Down
Color Menu
Function Select
In DMX Mode, select
Changes color of LED light output. Choose
Toggles between Manual
starting address.
color on the menu to change to desired color.
and DMX Modes.
LED Followspot 75 User Manual (Rev. 07)
Page 11 of 17