Mounting; Orientation; Rigging - Chauvet LED Followspot 75 User Manual

Mounting

Orientation

Rigging

Mounting Diagram
Page 8 of 17
Before mounting this product, read and follow the safety recommendations indicated in
the Safety Notes section (page 2 of this manual).
The LED Followspot 75 may be mounted in any position; however, make sure adequate
ventilation is provided around the product.
 Before deciding on a location for this product, always make sure that it will be easy
to access the unit for maintenance and programming purposes.
 Make sure that the structure onto which you are mounting this product can support
its weight. Please see the Technical Specifications section of this manual for weight
information.
 When mounting this product overhead, always use a safety cable. Mount the
product securely to a rigging point, whether an elevated platform or a truss.
 When rigging this product onto a truss, you should use a mounting clamp of
appropriate weight capacity. The bracket has a 13 mm hole, which is appropriate for
this purpose.
 The bracket adjustment knobs allow for directional adjustment when aiming the
product to the desired angle. Only loosen or tighten the bracket knobs using your
bare hands. Using tools could damage the knobs.
This product also works with the Chauvet CH-W28 tripod stand (sold separately).
Bracket Adjustment
Knob (x2)
Mounting Bracket
LED Followspot 75 User Manual (Rev. 07)