Modify A Self-Access Rule; Delete A Self-Access Rule; Figure 9.8 Self-Access Acl Configuration Example - Asus RX3042H User Manual

RX3042H User's Manual
Example
Figure 9.8 shows a sample self-access ACL configuration to allow
HTTP traffic from any one to RX3042H.
Figure 9.8. Self-Access ACL Configuration Example

9.6.2 Modify a Self-Access Rule

To modify a Self-Access rule, follow the instructions below:
1. Open the Self-Access ACL configuration page by clicking
Firewall/NAT ->Self-Access ACL menu.
2. Click on the icon of the Self-Access rule to be modified in the
Existing Self-Access ACL table or select the Self-Access ACL
from the ID drop-down list.
3. Make desired changes to any or all of the following fields: action,
source/destination IP, service, time and log. Please see Table 9.3
for explanation of these fields.
4. Click on the "Modifiy" button to save the changes. The new
settings for this Self-Access rule will then be displayed in the
Existing Self-Access ACL table located at the bottom half of the
Self-Access ACL configuration page.

9.6.3 Delete a Self-Access Rule

To delete a Self-Access rule, click on the
deleted.
Configuring Firewall
icon of the rule to be
79