Table of Contents
Advertisement
RX3042H User's Manual
connection mode, the range of MTU is from 546 to 1492. The
default value is 1492.
10.Enter appropriate connection settings for "Disconnect after
Idle (min)" and "Connect on Demand".
11.Click "Apply" to save the settings.
5.2.3 PPPoE Unnumbered
Some of the ADSL service providers may offer PPPoE unnumbered
service. Choose this connection mode if your ISP provides such
service.
Figure 5.4. WAN – PPPoE Unnumbered Configuration
Router Setup
33
Advertisement
Table of Contents
