Assigning Static Ip Addresses To Your Pcs - Asus RX3042H User Manual

RX3042H User's Manual
protocols. If the list includes TCP/IP Protocol, then the protocol
has already been enabled. Skip to step 9.
4. If TCP/IP does not display as an installed component, click
<Add> button.
5. In the Select Network Protocol dialog box, select TCP/IP, and
then click <OK> button.
You may be prompted to install files from your Windows NT
installation CD or other media. Follow the instructions to install
the files.
After all files are installed, a window displays to inform you that
a TCP/IP service called DHCP can be set up to dynamically
assign IP information.
6. Click <Yes> button to continue, and then click <OK> button if
prompted to restart your computer.
Next, configure the PCs to accept IP addresses assigned by
the RX3042H:
7. Open the Control Panel window, and then double-click the
Network icon.
8. In the Network dialog box, click the Protocols tab.
9. In the Protocols tab, select TCP/IP, and then click <Properties>
button.
10.In the Microsoft TCP/IP Properties dialog box, click the radio
button labeled Obtain an IP address from a DHCP server.
11. Click <OK> button twice to confirm and save your changes,
and then close the Control Panel.

3.2.6 Assigning static IP addresses to your PCs

In some cases, you may want to assign IP addresses to some or all
of your PCs directly (often called "statically"), rather than allowing
the RX3042H to assign them. This option may be desirable (but not
required) if:
• You have obtained one or more public IP addresses that
you want to always associate with specific computers (for
example, if you are using a computer as a public web
Quick Start Guide
17