Asus RX3042H User Manual page 84

Configuring Firewall
Field
NAT
None
IP Address
Auto
Source
This option allows you to set the source network to which this rule
should apply. Use the drop-down list to select one of the following
options:
Any
IP Address
IP Address
Subnet
Field
Address
Mask
MAC Address This option allows you to specify a MAC address on
MAC
Destination
This option allows you to set the destination network to which
this rule should apply. Use the drop-down list to select one of the
following options:
Any
72
Description
Select this option if you donʼt intend to use NAT in this
ACL rule.
Select this option to specify the IP address of the you
want the outgoing traffic to use as the source IP address.
Note this option is called.
RX3042H automatically uses the IP address of the
interface that the traffic is to be forwarded as the source
IP address. It is recommended that you select this option
if NAT is to be used for out going traffic
This option allows you to apply this rule to all the
computers in the source network, such as those on the
Internet for the inbound traffic or all the computers in the
local network for outbound traffic.
This option allows you to specify an IP address on which
this rule will be applied.
Specify the appropriate network address
This option allows you to include all the computers that
are connected in an IP subnet. When this option is
selected, the following fields become available:
Description
Enter the appropriate IP address.
Enter the corresponding subnet mask.
which this rule will be applied.
Enter the desired MAC address.
This option allows you to apply this rule to all the
computers in the local network for inbound traffic or any
computer in the Internet for outbound traffic.
RX3042H User's Manual