Table 9.4 Service Configuration Parameters - Asus RX3042H User Manual

RX3042H User's Manual
IP Address,
Subnet
Service
Select a service, from the drop-down list, to which this rule
should apply. If the desired service is not listed, click on the
Edit button to create a new service.
Time
Select a time slot during which this rule should apply.
Enable
Date and Time
Table 9.4. Service Configuration Parameters
Field
Service Name
Enter a distinctive name identifying the new service.
Protocol
Select a protocol type from the drop-down list. Available options are All,
TCP, UDP, ICMP, IGMP, AH ESP and TCP/UDP.
Port Range
This option allows you to set the destination port to which this rule should
apply. Use the drop-down list to select one of the following options:
Any
Single
Port Number
Range
Start Port
End Port
Select any of these options and enter details as
described in the Source IP section above.
Check this box if you want to activate the ACL rule at the
time specified.
Chck the desired dates and time for this ACL rule.
Description
Select this option if you want this rule to apply to all
applications with an arbitrary source port number.
This option allows you to apply this rule to an application
with a specific source port number.
Enter the source port number
Select this option if you want this rule to apply to
applications with this port range. The following fields
become available for entry when this option is selected.
Enter the starting port number of the range
Enter the ending port number of the range
Configuring Firewall
73