Table of Contents
Advertisement
RX3042H User's Manual
5. A count down timer will display, as shown in Figure 10.20, after
the firmware upgrade is completed. Youʼll be reconnected
back to RX3042H when the counter returns to zero. You may
need to manually connect back to the RX3042H if you are not
connected back to RX3042H automatically.
Figure 10.20 System Reboot Count Down Timer for Firmware
6. When you are reconnected to the RX3042H, click Status menu
to check if the new firmware is properly upgraded. Note that you
probably need to clear the cache of your web browser to see
the new System Information page. Following is the procedure to
clear the browser cache for Microsoft Internet Explorer:
a) Click on Tools menu
b) Click on Internet Options... menu
c) Click on Delete Files... button to clear the browser cache.
10.9
Restart System
1. Open the Restart System page, as shown in Figure 10.21, by
clicking the Management ->Restart System menu.
2. Click on the Apply button to restart the system.
Upgrade
System Management
103
Advertisement
Table of Contents
