Configuring Firewall
9.3.2.2 Configuring DoS Settings
To configure DoS settings, follow the instructions below:
1. Open the Firewall General configuration page as shown in
Figure 9.3 by clicking on Firewall ->Security menu.
2. Check or uncheck individual check box for each type DoS
protection.
3. Click Apply to save the settings.
Figure 9.3. Firewall General Configuration Page
9.4
ACL Rule Configuration Parameters
9.4.1 ACL Rule Configuration Parameters
Table 9.3 describes the configuration parameters firewall inbound,
outbound and self-access ACL rules.
70
RX3042H User's Manual