Internal Call Transfer; Display Of Call Duration; Microphone Mute; Pause Key - Topcom Butler 800 User Manual

Topcom Butler 800/Twin

3.7 INTERNAL CALL TRANSFER

When you want to transfer an external call to another handset:
1. During a conversation, press INT
2. Select the number of the internal handset, the external caller is put on hold.
3. When the other handset picks up, press
If the internal corespondent does not pick-up, press INT again to reconnect to the external
caller on line.

3.8 DISPLAY OF CALL DURATION

The call duration is displayed after 15 seconds, in minutes - seconds.
At the end of each call, the total call duration is displayed for 5 seconds.

3.9 MICROPHONE MUTE

It is possible to mute the microphone during a conversation.
Press during the conversation, the microphone is then deactivated, you can talk freely
without being heard by the calling party.
"MUTE" is displayed. Press

3.10 PAUSE KEY

When dialling a number you can add a pause between two digits by pressing the redail/pause
key for 2s.

3.11 CALLER IDENTIFICATION

Caller identification is only available if you have subscribed to this service with your
telephone operator.
When you receive an external call, the callers number will appear on the display as the
telephone rings.
If the network sends it, or if the name of the caller is in the address book, the caller is identified
by his or her name.
The caller identity is replaced by the call duration after 15 seconds in communication. It is still
possible to display the caller's identity after this time by pressing OK-key repeatedly for the
name and number.
3.11.1 List of calls
Your telephone keeps a list in memory of the last 30 calls received. This function is only
available if your are subscribed to the caller ID information. The correspondents that have
called are identified by their telephone number or name in the same way as in caller
identification.
The presence of new / unanswered calls is indicated by the flashing
To consult the list of calls:
1. Press . If there are no calls in the list 'EMPTY' will appear.
2. Scroll through the calls using the up
shown if the name is send by the network or is stored in the phonebook. When
shown, this call is been aswered. When
the end of the list you will hear a beep tone.
10
to hang up and transfer the call.
again to return to normal mode.
or down
is shown, the call is unaswered. If you are at
-icon on the display.
arrows. The callers names will be
is
Topcom Butler 800/Twin