Hands Free Mode; Internal Call Transfer; Conference Call; Display Of Call Duration - Topcom BUTLER 2562 User Manual

ENGLISH
Normal numeration:
1. Press INT for 2 sec.
2. Enter the number of the internal handset (1 to 5)
Prenumération:
1. Enter the number of the internal handset (1 to 5)
2. Press INT for 2 sec.

3.6 HANDS FREE MODE

You can converse with your correspondent without picking up the handset.
To activate or deactivate the hands free mode, press the key during a call.
To adjust the volume, refer to the chapter " Personalisation "- adjusting speaker volume.

3.7 INTERNAL CALL TRANSFER

Only possible when more than one handset are registered to the base!!
When you want to transfer an external call to another handset:
1. During a conversation press and hold the INT key for 2 s.
2. Select the number of the internal handset, the external caller is put on hold.
3. When the other handset picks up, press to hang up and transfer the call.
If the internal correspondent does not pick-up, press INT for 2 seconds again to reconnect to the
external caller on line.

3.8 CONFERENCE CALL

Only possible when more than one handsets are registered to the base!!
You can converse simultaneously with an internal correspondent and an external correspondent.
When you are on line with an external correspondent:
1. Press and hold the INT key for 2 s.
2. Enter the number of the internal handset that you want to call
3. When the internal correspondent picks- up, press and hold
4. If the internal correspondent does not answer, press INT again for 2 sec. to reconnect to the external
correspondent on-line.

3.9 DISPLAY OF CALL DURATION

The call duration is displayed after 15 seconds, in minutes - seconds,: "00:20"
At the end of each call, the total call duration is displayed for 5 seconds.
12 Topcom Butler 2562