Rear Speakers - HP ENVY 15 Maintenance And Service Manual

Rear speakers

Description
Rear speakers (include left and right rear speakers, 2 cables, and 4 isolators)
Before removing the rear speakers, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the battery (see
a. Service door (see
b. mSATA SSD (see
c. Hard drive (see
d. Base enclosure (see
Remove the rear speakers:
1. Disconnect the rear speaker cable (1) from the system board.
2. Release the rear speaker cables from the clips (2) and routing channel built into the top cover.
3. Remove the four Phillips PM2.5×6.2 screws (3) that secure the rear speakers to the top cover.
82 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
Battery on page 40), and then remove the following components:
Service door on page
mSATA SSD on page
Hard drive on page 45)
Base enclosure on page
41)
42)
52)
Spare part number
720561-001