Service door
Description
Service door
Before removing the service door, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the battery (see
Remove the service door:
1.
Using a small Phillips screwdriver, loosen the Phillips PM2.0×4.0 captive screw (1) that secures
the service door to the computer.
2.
Lift the rear edge of the service door (2) and swing it up and forward until it disengages from
the computer.
3.
Remove the service door (3).
Battery on page
40).
Spare part number
720555-001
Component replacement procedures
41